Installation manual

Command Manual - Port
Quidway S3000-EI Series Ethernet Switches Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-15
1.1.18 port access vlan
Syntax
port access vlan vlan_id
undo port access vlan
View
Ethernet port view
Parameter
vlan_id: VLAN ID defined in IEEE802.1Q, ranging from 2 to 4094.
Description
Using port access vlan command, you can join the access port to a specified VLAN.
Using undo port access vlan command, you can cancel the access port from the
VLAN.
The use condition of this command is the VLAN indicated in vlan_id must exist.
Example
# Join Ethernet0/1 port to VLAN3 (VLAN3 has existed).
[Quidway-Ethernet0/1] port access vlan 3
1.1.19 port hybrid pvid vlan
Syntax
port hybrid pvid vlan vlan_id
undo port hybrid pvid
View
Ethernet port view
Parameter
vlan_id: VLAN ID defined in IEEE802.1Q, ranging from1 to 4094 and the default
vlan_id is 1.
Description
Using port hybrid pvid vlan command, you can configure the default VLAN ID of the
hybrid port. Using undo port hybrid pvid command, you can restore the default
VLAN ID of the hybrid port.