Installation manual

Command Manual - Port
Quidway S3000-EI Series Ethernet Switches Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-9
Example
# Configure the system to disable the port and send trap messages when actual traffic
on the port exceeds the threshold.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface ethernet0/1
[Quidway-Ethernet0/1] flow-constrain method shutdown
1.1.9 flow-control
Syntax
flow-control
undo flow-control
View
Ethernet port view
Parameter
none
Description
Using flow-control command, you can enable flow control feature on the Ethernet
port to avoid discarding data packets due to congestion. Using undo flow-control
command, you can disable flow control feature.
By default, flow control on the Ethernet port is disabled.
Example
# Enable flow control on Ethernet0/1.
[Quidway-Ethernet0/1] flow-control
1.1.10 flow-interval
Syntax
flow-interval interval
undo flow-interval
View
Ethernet port view