Installation manual

Command Manual - Port
Quidway S3000-EI Series Ethernet Switches Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-5
Field Description
input(total): 0 packets, 0 bytes
0 broadcasts, 0 multicasts
input(normal): - packets, - bytes
- broadcasts, - multicasts
input: 0 input errors, 0 runts, 0
giants, - throttles, 0 CRC
0 frame, - overruns, 0
aborts, 0 ignored, - parity errors
Output(total): 0 packets, 0 bytes
0 broadcasts, 0 multicasts,
0 pauses
Output(normal): - packets, - bytes
- broadcasts, - multicasts, -
pauses
Output: 0 output errors, 0
underruns, - buffer failures
- aborts, 0 deferred, 0
collisions, 0 late collisions
- lost carrier, - no carrier
The statistics information of input/output
packets and errors on this port
1.1.4 display loopback-detection
Syntax
display loopback-detection
View
Any view
Parameter
none
Description
Using display loopback-detection command, you can view whether the port
loopback detection has been enabled. If it has been enabled, then the time interval of
the detection and the current port loopback information will also be displayed.