Installation manual

Command Manual - Remote Power-feeding
Quidway S3000-EI Series Ethernet Switches
Chapter 1 Remote Power-feeding Configuration
Commands
Huawei Technologies Proprietary
1-8
PoE function relies on the PoE daughter-card inside the switch. User can use this
command to upgrade the application of PoE daughter-card, and the switch service is
not interruptive during this process. The extent name of the application file should be
“bin”.
Example
# use file “flash:/new.bin” to upgrade the PoE daughter-card.
[Quidway] poe update flash:/new.bin
1.1.11 reset poe-configuration
Syntax
reset poe-configuration
View
User view
Parameter
None
Description
Using the reset poe-configuration command, you can restore the default PoE
configuration on the current switch.
Example
# Restore the default PoE configuration on the current switch.
<Quidway> reset poe-configuration
This will delete the poe configuration in the flash memory.
The poe configurations will be erased to reconfigure.
Default poe configurations will be in effect now !
Are you sure?[Y/N]y
POE configuration is default!