Installation manual

Command Manual - Remote Power-feeding
Quidway S3000-EI Series Ethernet Switches
Chapter 1 Remote Power-feeding Configuration
Commands
Huawei Technologies Proprietary
1-7
[Quidway] poe power-management auto
1.1.9 poe priority
Syntax
poe priority { critical | high | low }
undo poe priority
View
Ethernet port view
Parameter
critical: The power supply priority of the port is critical.
high: The power supply priority of the port is high.
low: The power supply priority of the port is low.
Description
Using the poe priority command, you can configure the power supply priority of the
current port. Using the undo poe priority command, you can restore the default value.
By default, the power supply priority of the current port is low.
This command is used with power management of switch together. It will be effective
when power supply reaches full load. Please refer to the poe power-management
command.
Example
# Configure Ethernet0/1 with a power supply priority of high.
[Quidway-Ethernet0/1] poe priority high
1.1.10 poe update
Syntax
poe update file-url
View
System view
Parameter
file-url: the uniform resource locater of PoE daughter-card application.
Description
Using the poe update command, you can upgrade PoE daughter-card.