Installation manual

Command Manual - Getting Started
Quidway S3000-EI Series Ethernet Switches Chapter 2 System IP Configuration Commands
Huawei Technologies Proprietary
2-16
Table 2-7 Description of information generated by the command display ip
routing-table statistics
Field Description
Proto Routing protocol
route Number of routes
active Number of active routes
added
Number of added routes after the router is rebooted or the routing table is
cleared last time.
deleted Number of deleted routes (such routes will be freed in a period of time)
freed Number of freed routes
2.1.13 display ip routing-table verbose
Syntax
display ip routing-table verbose
View
Any view
Parameter
None
Description
Using display ip routing-table verbose command, you can view the verbose routing
table information.
With the verbose parameter, this command displays the verbose routing table
information. The descriptor describing the route state will be displayed first, then the
statistics of the entire routing table will be output and finally the verbose description of
each route will be output.
All current routes, including inactive route and invalid route, can be displayed using
display ip routing-table verbose command.
Example
# Display the verbose routing table information.
<Quidway> display ip routing-table verbose
Routing Tables:
Generate Default: no
+ = Active Route, - = Last Active, # = Both * = Next hop in use