Installation manual

Command Manual - Remote Power-feeding
Quidway S3000-EI Series Ethernet Switches
Chapter 1 Remote Power-feeding Configuration
Commands
Huawei Technologies Proprietary
1-5
1.1.6 poe max-power
Syntax
poe max-power max-power
undo poe max-power
View
Ethernet port view
Parameter
max-power: The maximum power supplied by a port, ranging from 100 to 15400
milliwatt.
Description
Using the poe max-power command, you can configure the maximum power supplied
by a port.
By default, a port supplies power under a maximum of 15400 milliwatt.
You can adjust this maximum according to the actual power of the PDs.
Example
# Configure the current port Ethernet0/1 to supply power under a maximum of 1000
milliwatt.
[Quidway-Ethernet0/1] poe max-power 1000
1.1.7 poe mode
Syntax
poe mode { signal | spare }
undo poe mode
View
Ethernet port view
Parameter
signal: The port supplies power through signal lines.
spare: The port supplies power through spare lines.
Description
Using the poe mode command, you can configure the power supply mode of the
current port. Using the undo poe mode command, you can restore the default value.