Installation manual

Command Manual - Remote Power-feeding
Quidway S3000-EI Series Ethernet Switches
Chapter 1 Remote Power-feeding Configuration
Commands
Huawei Technologies Proprietary
1-3
Ethernet0/23 current power : 0 mw
Ethernet0/24 current power : 0 mw
1.1.3 display poe powersupply
Syntax
display poe powersupply
View
Any view
Parameter
None.
Description
Using the display poe powersupply command, you can view the PoE parameters of
PSE power supply device.
Example
# Display the PoE parameters of PSE power supply device.
<Quidway> display poe powersupply
PSE ID :0
PSE Legacy Detection :disable
PSE PowerManagement :manual
PSE Total Power :200000 mW
PSE Available Power :196400 mW
PSE Average Power :3600 mW
PSE Peak Power :3600 mW
PSE Software Version :100
PSE Hardware Version :0
PSE CPLD Version :1
1.1.4 poe disable
Syntax
poe disable
undo poe disable
View
Ethernet port view