Installation manual

Command Manual - System Management
Quidway S3000-EI Series Ethernet Switches Chapter 7 NTP Configuration Commands
Huawei Technologies Proprietary
7-8
Designate an interface on the local equipment to broadcast NTP packets. The local
equipment runs in broadcast-server mode and regularly broadcasts packets to its
clients.
Example
# Configure to broadcast NTP packets via Vlan-Interface1 and encrypt them with Key 4
and set the NTP version number as 3.
[Quidway] interface vlan-interface1
[Quidway-Vlan-Interface1] ntp-service broadcast-server authentication-key 4
version 3
7.1.10 ntp-service max-dynamic-sessions
Syntax
ntp-service max-dynamic-sessions number
undo ntp-service max-dynamic-sessions
View
System view
Parameter
number: The maximum sessions can be created locally, ranging from 0 to 100.
Description
Using ntp-service max-dynamic-sessions command, you can set how many
sessions can be created locally. Using undo ntp-service max-dynamic-sessions
command, you can resume the default maximum session number
By default, a local device allows up to 100 sessions.
Example
# Set the local equipment to allow up to 50 sessions.
[Quidway] ntp-service max-dynamic-sessions 50
7.1.11 ntp-service multicast-client
Syntax
ntp-service multicast-client [ ip-address ]
undo ntp-service multicast-client [ ip-address ]
View
VLAN interface view