Installation manual

Command Manual - System Management
Quidway S3000-EI Series Ethernet Switches Chapter 6 RMON Configuration Commands
Huawei Technologies Proprietary
6-7
6.1.6 display rmon statistics
Syntax
display rmon statistics [ port-num ]
View
Any view
Parameter
port-num: Ethernet port number.
Description
Using display rmon statistics command, you can view RMON statistics.
The displayed information includes collision, CRC (Cyclic Redundancy Check) and
queue, undersized or oversized packet, timeout, fragment, broadcast, multicast,
unicast, and bandwidth utility.
For the related commands, see rmon statistics.
Example
# Show RMON statistics.
<Quidway> display rmon statistics Ethernet 2/1
Statistics entry 1 owned by HUAWEI is VALID.
Interface : Ethernet2/1<ifEntry.642>
Received :
octets :0 , packets :0
broadcast packets :0 , multicast packets:0
undersized packets :0 , oversized packets:0
fragments packets :0 , jabbers packets :0
CRC alignment errors:0 , collisions :0
Dropped packet (insufficient resources):0
Packets received according to length (octets):
64 :0 , 65-127 :0 , 128-255 :0
256-511:0 , 512-1023:0 , 1024-1518:0
Table 6-6 Output description of the display rmon statistics command
Field Description
Interface Port
HUAWEI Owner
VALID The entry corresponding to the index is valid
octets Received/Sent octets in sampling time