Installation manual

Command Manual - System Management
Quidway S3000-EI Series Ethernet Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-29
debugging: Debugging information.
logging: Log information.
trapping: Trap information.
Description
Using info-center switch-on command, you can turn on the information
synchronization switch of the specified switch. Using undo info-center switch-on
command, you can turn off the information synchronization switch of the specified
switch.
After the forming of a Fabric by switches which support the XRN, the log, debugging
and trap information among the switches is synchronous. The synchronization process
is as follows: each switch sends its own information to other switches in the Fabric and
meantime receives the information from others, and then the switch updates the local
information to ensure the information coincidence within the Fabric.
The switch provides command line to turn on/off the synchronization switch in every
switch. If the synchronization switch of a switch is turned off, it does not send
information to other switches but still receives information from others.
Example
# Turn on the trapping information synchronization switch of the unit 2.
[Quidway] info-center switch 2 trapping
4.5.13 info-center timestamp
Syntax
info-center timestamp { log | trap | debugging } { boot | date | none }
undo info-center timestamp { log | trap | debugging }
View
System view
Parameter
log: Log information.
trap: Trap information.
debugging: Debugging information.
boot: Time elapsing after system starts. Format: xxxxxx.yyyyyy, xxxxxx is the high 32
bits of the elapsed time (in milliseconds) after system starts, and yyyyyy is the low 32
bits.
date: Current system date and time. It shows as yyyy/mm/dd-hh:mm:ss in Chinese
environment and mm/dd/yyyy-hh:mm:ss in Western language environment.