Installation manual

Command Manual - System Management
Quidway S3000-EI Series Ethernet Switches Chapter 3 Device Management Commands
Huawei Technologies Proprietary
3-7
Description
Using reboot command, you can reset the Ethernet Switch when failure occurs.
Example
# Reboots the Switch.
<Quidway> reboot
3.1.11 temperature-limit
Syntax
temperature-limit slot down-value up-value
undo temperature-limit slot
View
User view, system view
Parameter
slot: Physical card number.
down-value: Lower temperature limit.
up-value: Upper temperature limit.
Description
Using temperature-limit command, you can configure temperature limit. Using undo
temperature-limit command, you can restore temperature limit to default value.
Example
# Set the lower and upper temperature limit of card 0.
<Quidway> temperature-limit 0 10 75
Success temperature limit set