Installation manual

Command Manual - Getting Started
Quidway S3000-EI Series Ethernet Switches Chapter 2 System IP Configuration Commands
Huawei Technologies Proprietary
2-4
Vlan-interface1 current state : DOWN ,
Line protocol current state : DOWN
Internet Address is 1.1.1.1/8 Primary
Broadcast address : 1.255.255.255
The Maximum Transmit Unit : 1500 bytes
input packets : 0, bytes : 0, multicasts : 0
output packets : 0, bytes : 0, multicasts : 0
Table 2-3 Output description of display ip interface vlan-interface command
Field Description
Vlan-interface1 current state
The current state of management VLAN
interface
Line protocol current state The current state of Line protocol
Internet Address IP address
Broadcast address Broadcast address
The Maximum Transmit Unit The Maximum Transmit Unit
2.1.5 display ip routing-table
Syntax
display ip routing-table
View
Any view
Parameter
None
Description
Using display ip routing-table command, you can view the routing table summary.
This command displays routing table information in summary form. Each line
represents one route. The contents include destination address/mask length, protocol,
preference, metric, next hop and output interface.
Only current used route, i.e., best route, is displayed using display ip routing-table
command.
Example
# View the summary of routing table.
<Quidway> display ip routing-table