Installation manual

Command Manual - System Management
Quidway S3000-EI Series Ethernet Switches Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-23
Description
Using disconnect command, subscribers can disconnect FTP client side from FTP
server side without exiting FTP client side view.
This command terminates the control connection and data connection with the remote
FTP Server at the same time.
Example
# Terminate connection with the remote FTP Server and stays in FTP Client view.
[ftp] disconnect
1.4.11 ftp
Syntax
ftp [ ipaddress [ port ] ]
View
User view
Parameter
ipaddress: IP address of the remote FTP Server.
port: Port number of remote FTP Server.
Description
Using ftp command, you can establish control connection with the remote FTP Server
and enter FTP Client view.
Example
# Connect to FTP Server at the IP address 1.1.1.1
<Quidway> ftp 1.1.1.1
1.4.12 get
Syntax
get remotefile [ localfile ]
View
FTP Client view
Parameter
localfile: Local file name.