Installation manual

Command Manual - System Management
Quidway S3000-EI Series Ethernet Switches Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-18
Description
Using service-type command, you can configure a service type for a particular user.
Using undo service-type command, you can cancel the specified service type for the
user.
Example
# Set to provide the lan-access service for the user huawei1.
[Quidway-user-huawei1] service-type lan-access
1.4 FTP Client Commands
1.4.1 ascii
Syntax
ascii
View
FTP Client view
Parameter
none
Description
Using ascii command, you can configure data transmission mode as ASCII mode.
By default, the file transmission mode is ASCII mode.
Perform this command if the user needs to change the file transmission mode to default
mode.
Example
# Configure to transmit data in the ASCII mode.
[ftp] ascii
200 Type set to A.
1.4.2 binary
Syntax
binary
View
FTP Client view