Installation manual

Command Manual - System Management
Quidway S3000-EI Series Ethernet Switches Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-13
View
User view
Parameter
none
Description
Using save command, you can save the current configuration files to Flash memory.
After finishing a group of configurations and achieving corresponding functions, user
should remember to get the current configuration files stored in the flash memory.
For the related commands, see reset saved-configuration, display
current-configuration, display saved-configuration.
Example
# Get the current configuration files stored in the flash memory.
<Quidway> save
This will save the configuration in the flash memory.
The switch configurations will be written to flash.
Are you sure?[Y/N]
Now saving current configuration to flash memory.
Please wait for a while...
Save current configuration to flash memory successfully.
1.3 FTP Server Configuration Commands
1.3.1 display ftp-server
Syntax
display ftp-server
View
Any view
Parameter
none
Description
Using display ftp-server command, you can view the parameters of the current FTP
Server. You can perform this command to verify the configuration after setting FTP
parameters.