Installation manual

Command Manual - Getting Started
Quidway S3000-EI Series Ethernet Switches Chapter 2 System IP Configuration Commands
Huawei Technologies Proprietary
2-2
Description
Using display interface vlan-interface command, you can view the related
information about management VLAN interface such as physical status and link status
of management VLAN interface, Ethernet frame format, MAC address, IP address and
sub-net mask, description character string and MTU, etc.
For the related command, see interface vlan-interface.
Example
# Display related information about management VLAN interface.
<Quidway> display interface vlan-interface 1
Vlan-interface1 current state : DOWN
Line protocol current state : DOWN
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is
00e0-fc07-4101
Internet Address is 10.1.1.1/24 Primary
Description : HUAWEI, Quidway Series, Vlan-interface1 Interface
The Maximum Transmit Unit is 1500
Table 2-1 Output description of display interface vlan-interface command
Field Description
Vlan-interface1 current state
The current state of management VLAN
interface
Line protocol current state The current state of Line protocol
IP Sending Frames' Format Ethernet frame format
Hardware address
MAC address corresponding management
VLAN interface
Internet Address IP address
Description
management VLAN interface description
character string
The Maximum Transmit Unit The Maximum Transmit Unit
2.1.3 display ip host
Syntax
display ip host
View
Any view