Installation manual

Command Manual - Network Protocol
Quidway S3000-EI Series Ethernet Switches
Chapter 6 IP Performance Configuration
Commands
Huawei Technologies Proprietary
6-2
Table 6-1 Description of the output information of the display fib command
Field Description
Flag
The flag options include:
B – Blackhole route
D – Dynamic route
G – Gateway route
H – Local host route
S – Static route
U – Route in UP status
R – Unreachable route
L – Route generated by ARP or ESIS
6.1.2 display icmp statistics
Syntax
display icmp statistics
View
Any view
Parameter
None
Description
Using display icmp statistics command, you can view the statistics information about
ICMP packets.
For the related command, see display ip interface vlan-interface, reset ip statistics.
Example
# View statistics about ICMP packets.
<Quidway> display icmp statistics
Input: bad formats 0 bad checksum 0
echo 5 destination unreachable 0
source quench 0 redirects 0
echo reply 10 parameter problem 0
timestamp 0 information request 0
mask requests 0 mask replies 0
time exceeded 0
Output:echo 10 destination unreachable 0
source quench 0 redirects 0