Installation manual

Command Manual - Network Protocol
Quidway S3000-EI Series Ethernet Switches Chapter 4 BOOTP Client Configuration Commands
Huawei Technologies Proprietary
4-2
Using the display bootp client command, you can view the information about BOOTP
client, including its MAC address and the applied IP address etc.
Example
# Display the information about BOOTP client.
[Quidway] display bootp client interface vlan-interface 1
Vlan-interface1:
Allocated IP: 169.254.0.2 255.255.0.0
Transaction ID = 0x3d8a7431
Mac Address 00e0-fc0a-c3ef
Table 4-1 Display information description of display bootp client
Field Description
Vlan-interface1 Configure VLAN interface 1 to obtain IP address using BOOTP
Transaction ID XID filed value in BOOTP packet
4.1.3 ip address bootp-alloc
Syntax
ip address bootp-alloc
undo ip address bootp-alloc
View
VLAN interface view/M-Ethernet port view
Parameter
None
Description
Using the ip address bootp-alloc command, you can configure VLAN interface to
obtain IP address using BOOTP. Using the undo ip address bootp-alloc command,
you can remove the configuration.
By default, the VLAN interface does not obtain IP address using BOOTP.
For the related command, see display bootp client.
Example
# Configure VLAN interface 1 to obtain IP address using BOOTP.
[Quidway-Vlan-interface1] ip address bootp-alloc