Installation manual

Command Manual - Network Protocol
Quidway S3000-EI Series Ethernet Switches
Chapter 2 DHCP-Snooping Configuration
Commands
Huawei Technologies Proprietary
2-3
dynamic 202.38.12.45 00e0-fc00-0006 286 1 Ethernet0/1
2.1.4 display dhcp-snooping count
Syntax
display dhcp-snooping count
View
Any view
Parameter
None
Description
Use the display dhcp-snooping count command to display the number of the
DHCP-Snooping entries in the binding table.
Example
# Display the number of the DHCP-Snooping entries in the binding table.
<Quidway> display dhcp-snooping count
0 dhcp-snooping item(s) found
2.1.5 display dhcp-snooping trust
Syntax
display dhcp-snooping trust
View
Any view
Parameter
None
Description
Using display dhcp-snooping trust command, you can view the status of the
DHCP-Snooping function and the information about the trusted ports.
For the related command, see dhcp-snooping trust.
Example
# Display the status of the DHCP-Snooping function and the information about the
trusted ports.