Installation manual

Command Manual - Network Protocol
Quidway S3000-EI Series Ethernet Switches Chapter 1 ARP Configuration Commands
Huawei Technologies Proprietary
1-6
Parameter
dynamic: Clear the dynamic ARP mapping entries.
static: Clear the static ARP mapping entries
interface interface-name: Clear the ARP mapping entries that are related to the
specified. port, represented with interface-name= interface-type interface-number.
interface-type is port type and interface-number is port number. For details about
interface-type, interface-number and interface-name, refer to the Port Command
Manual.
Description
Using reset arp command, you can reset the ARP mapping entries.
For the related command, see arp static, display arp.
Example
# Reset the static ARP entries.
<Quidway> reset arp static
1.2 Gratuitous ARP Configuration Commands
1.2.1 gratuitous-arp-learning enable
Syntax
gratuitous-arp-learning enable
undo gratuitous-arp-learning enable
View
System view
Parameter
None
Description
Use the gratuitous-arp-learning enable command to enable gratuitous ARP packet
learning.
Use the undo gratuitous-arp-learning enable command to disable this function.
By default, gratuitous ARP packet learning is disabled.
Gratuitous ARP function is to implement the following functions by sending out
gratuitous ARP packets: