Installation manual

Command Manual - Getting Started
Quidway S3000-EI Series Ethernet Switches Chapter 1 Logging in Switch Commands
Huawei Technologies Proprietary
1-22
text: Specifies the hostname with a character string, ranging from 1 to 30 characters.
The default name is Quidway.
Description
Using sysname command, you can configure the hostname of the switch. Using undo
sysname command, you can restore the default hostname.
Changing the hostname of the switch will affect the prompt of command line interface.
For example, if the hostname of the switch is Quidway, the prompt in user view will be
<Quidway>.
Example
# Configure the hostname of switch to Switch.
[Quidway] sysname Switch
[Switch]
1.1.29 system-view
Syntax
system-view
View
User view
Parameter
None
Description
Using system-view command, you can enter system view from user view.
For the related commands, see quit, return.
Example
# Enter system view from user view.
<Quidway> system-view
[Quidway]
1.1.30 telnet
Syntax
telnet { hostname | ip-address } [ service-port ]
View