Installation manual

Command Manual - Security
Quidway S3000-EI Series Ethernet Switches
Chapter 2 AAA & RADIUS Protocol Configuration
Commands
Huawei Technologies Proprietary
2-22
For the related command, see local-server.
Example
# Display the statistics of local RADIUS authentication server.
<Quidway> display local-server statistics
The localserver packet statistics:
Receive: 0 Send: 0
Discard: 0 Receive Packet Error: 0
Auth Reveive: 0 Auth Send: 0
Acct Receive: 0 Acct Send: 0
2.2.5 display radius
Syntax
display radius [ radius-scheme-name ]
View
Any view
Parameter
radius-scheme-name: Specifies the RADIUS scheme name with a character string not
exceeding 32 characters. Display all RADIUS schemes when the parameter is not set.
Description
Using display radius command, you can view the configuration information of all
RADIUS schemes or a specified one.
By default, This command outputs the configuration information about the specified or
all the RADIUS schemes. The output can help with RADIUS diagnosis and
troubleshooting.
For the related command, see radius scheme.
Example
# Display the configuration information of all the RADIUS schemes.
<Quidway> display radius
------------------------------------------------------------------
SchemeName =system Index=0 Type=huawei
Primary Auth IP =127.0.0.1 Port=1645 State=block
Primary Acct IP =127.0.0.1 Port=1646 State=block
Second Auth IP =0.0.0.0 Port=1812 State=block
Second Acct IP =0.0.0.0 Port=1813 State=block
Auth Server Encryption Key= huawei