Installation manual

Command Manual - Security
Quidway S3000-EI Series Ethernet Switches
Chapter 2 AAA & RADIUS Protocol Configuration
Commands
Huawei Technologies Proprietary
2-18
z String ID: The switch compares the string ID delivered from the server with the
VLAN names existing on the switch. If a matching entry is found, the switch adds
the port into the corresponding VLAN. Otherwise, the delivery fails and the user
cannot pass the authentication.
By default, the integer mode is selected, that is, the switch supports the RADIUS server
delivering the integer VLAN ID.
 Note:
For the string delivery mode, the switch follows this rule in handling strings: If the
RADIUS server delivers VLANs with full number string IDs (1024 for example) and their
converted integer form is within the VLAN range, the switch just handles them as
integer IDs and add the authentication port to the VLAN with the corresponding integer
ID. In this example, the port is added into VLAN 1024.
For the related commands, see name.
Example
# Specify the dynamic VLAN delivery mode as integer.
[Quidway-isp-ias] vlan-assignment-mode integer
2.2 RADIUS Protocol Configuration Commands
2.2.1 accounting-on enable
Syntax
accounting-on enable [ send times ] [ interval interval ]
undo accounting-on { enable | send | interval }
View
RADIUS Scheme view
Parameter
times: Maximum number for sending Accounting-On packets. It ranges from 1 to 256
and defaults to 15.
Interval: Time interval for sending Accounting-On packets. It ranges from 1 to 30 in
seconds and defaults to 3.