Installation manual

Command Manual - Integrated Management
Quidway S3000-EI Series Ethernet Switches
Chapter 3 Multicast MAC Address for Cluste
r
Management Commands
Huawei Technologies Proprietary
3-1
Chapter 3 Multicast MAC Address for Cluster
Management Commands
3.1 Multicast MAC Address for Cluster Management
Commands
3.1.1 cluster-mac
Syntax
cluster-mac H-H-H
View
Cluster view
Parameter
H-H-H: MAC address of the client host, in hexadecimal notation. It is in the range of
0180-C200-0000 or 0180-C200-000A and 0180-C200-0020 to 0180-C200-002F.
Description
Use the cluster-mac command to configure a multicast MAC address for cluster
management. You can only use this command on the management device.
When the management device is configured with a multicast MAC address, it can send
multicast packets to the cluster member switches.
After the multicast MAC address is configured, the system prompts you to define the
time interval for sending multicast packets if it is 0.
Example
# Configure the multicast MAC address of the management device as
0180-C200-0000.
[huawei_0.Quidway-cluster] cluster-mac 0180-C200-0000
3.1.2 cluster-mac syn-interval
Syntax
cluster-mac syn-interval time-interval
View
Cluster view