Installation manual

Command Manual - QoS/ACL
Quidway S3000-EI Series Ethernet Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-15
Parameter
cos0-map-local-prec: Specifies the mapping value of “COS 0->local-prec”, which
ranges from 0 to 7.
cos1-map-local-prec: Specifies the mapping value of “COS 1->local-prec”, which
ranges from 0 to 7.
cos2-map-local-prec: Specifies the mapping value of “COS 2->local-prec”, which
ranges from 0 to 7.
cos3-map-local-prec: Specifies the mapping value of “COS 3->local-prec”, which
ranges from 0 to 7.
cos4-map-local-prec: Specifies the mapping value of “COS 4->local-prec”, which
ranges from 0 to 7.
cos5-map-local-prec: Specifies the mapping value of “COS 5->local-prec”, which
ranges from 0 to 7.
cos6-map-local-prec: Specifies the mapping value of “COS 6->local-prec”, which
ranges from 0 to 7.
cos7-map-local-prec: Specifies the mapping value of “COS 7->local-prec”, which
ranges from 0 to 7.
Description
Using qos cos-local-precedence-map command, you can configure “COS
->Local-precedence” map. Using undo qos cos-local-precedence-map command,
you can restore its default value.
By default, the system provides the default “COS ->Local-precedence” mapping
relationship.
Table 2-9 The default “COS ->Local-precedence” map
COS Value Local Precedence
0 2
1 0
2 1
3 3
4 4
5 5
6 6
7 7
If needed, you can change “COS->Local-precedence” map using the command.