Installation manual

Command Manual - QoS/ACL
Quidway S3000-EI Series Ethernet Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-11
2.1.10 display queue-scheduler
Syntax
display queue-scheduler
View
Any view
Parameter
None
Description
Using display queue-scheduler command, you can view the queue scheduling mode
and parameters.
For the related command, see queue-scheduler.
Example
# Display the queue scheduling mode and parameters.
<Quidway> display queue-scheduler
Queue scheduling mode: strict-priority
The display information shows the queue scheduling mode of the switch is
Strict-Priority.
2.1.11 line-rate
Syntax
line-rate target-rate
undo line-rate
View
Ethernet port view
Parameter
target-rate: Specifies the general packet sending rate on a port, ranging from 1 to 100
measured in Mbps.
Description
Using line-rate command, you can configure the limitation of the rate to restrict the
general speed of sending packets through the port. Using undo line-rate command,
you can cancel the limitation of the rate.