Installation manual

Command Manual - QoS/ACL
Quidway S3000-EI Series Ethernet Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-9
2.1.8 display qos-interface line-rate
Syntax
display qos-interface [ interface-name | interface-type interface-num ] line-rate
View
Any view
Parameter
interface-name | interface-type interface-num: Specifies a port of the switch. For
detailed information, refer to the port command manual.
Description
Using display qos-interface line-rate command, you can view the settings of
outgoing line rate on the port.
If you do not input the port parameters, the command will display the outgoing line rate
settings on the port. If you set the port parameters, the configuration information about
the specified port will be displayed. The information displayed includes egress port
and the line rate.
Example
# Display the line rate settings on the port.
[Quidway-Ethernet0/4] display qos-interface line-rate
Ethernet0/2: line-rate
Line rate: 3 Mbps
Ethernet0/4: line-rate
Line rate: 5 Mbps
Table 2-7 the display Information
Field Description
Ethernet0/2: line-rate
Line rate: 3 Mbps
Indicates the line-rate configuration of the port.
“Line rate: 3 Mbps” indicates the general packet
sending rate on a port.
2.1.9 display qos-interface traffic-limit
Syntax
display qos-interface [ interface-name | interface-type interface-num ] traffic-limit
View