Installation manual

Command Manual - QoS/ACL
Quidway S3000-EI Series Ethernet Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-7
Description
Using display qos-global traffic-statistic command, you can view the traffic statistics
information.
This command is used for displaying the traffic statistics information. The information
displayed includes the ACL corresponding to the traffic to be counted and the number
of packets counted.
The statistics information of traffic-statistic command includes the matched times of
the transmitted data by switch. User can use display qos-global traffic-statistic
command to display the statistics information.
For the related command, see traffic-statistic.
Example
# Display the traffic statistics information.
<Quidway> display qos-global traffic-statistic
traffic-statistic
Matches: acl std1 rule 0 running
0 byte
0 packet
Matches: acl std1 rule 1 running
0 byte
0 packets
Table 2-5 the display Information
Field Description
traffic-statistic
Matches: acl std1 rule 0 running
0 byte
0 packet
Matches: acl std1 rule 1 running
0 byte
0 packet
Indicates the traffic-statistic
configuration of the switch.
“Matches: acl std1 rule 0 running”
indicates the classification rule to the
traffic.
“ 0 byte 0 packet” indicates
the statistic information for the packets
matching the classification rule.
2.1.7 display qos-interface all
Syntax
display qos-interface [ interface-name | interface-type interface-num ] all
View
Any view