Installation manual

Command Manual - QoS/ACL
Quidway S3000-EI Series Ethernet Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-6
Description
Using display qos-global traffic-redirect command, you can view the settings of the
redirection.
This command is used for displaying the settings of the redirection. The information
displayed includes the ACL corresponding to the traffic to be redirected, the
destination port of redirection.
For the related command, see traffic-redirect.
Example
# Display the settings of the redirection.
<Quidway> display qos-global traffic-redirect
traffic-redirect
Matches: acl std1 rule 0 running
Redirected to: interface Ethernet0/2
Matches: acl std1 rule 1 running
Redirected to: interface Ethernet0/2
Table 2-4 the display Information
Field Description
traffic-redirect
Matches: acl std1 rule 0 running
Redirected to: interface
Ethernet0/2
Matches: acl std1 rule 1 running
Redirected to: interface
Ethernet0/2
Indicates the traffic-redirect
configuration of the switch.
“Matches: acl 1 rule 0 running”
indicates the classification rule to the
traffic.
“Redirected to: interface Ethernet0/2”
indicates the redirect port for the
packets matching the classification rule.
2.1.6 display qos-global traffic-statistic
Syntax
display qos-global traffic-statistic
View
Any view
Parameter
None