Installation manual

Command Manual - QoS/ACL
Quidway S3000-EI Series Ethernet Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-5
Description
Using display qos-global traffic-priority command, you can view the settings of
traffic priority.
This command is used for displaying the settings of traffic priority. The information
displayed includes the ACL corresponding to the traffic tagged with priority, priority
type and value.
For the related command, see traffic-priority.
Example
# Display the settings of traffic priority.
<Quidway> display qos-global traffic-priority
traffic-priority
Matches: acl std1 rule 0 running
Priority action: dscp ef
Matches: acl std1 rule 1 running
Priority action: dscp ef
Table 2-3 the display Information
Field Description
traffic-priority
Matches: acl std1 rule 0 running
Priority action: dscp ef
Matches: acl std1 rule 1 running
Priority action: dscp ef
Indicates the traffic-priority configuration
of the switch.
“Matches: acl std1 rule 0 running”
indicates the classification rule to the
traffic.
“Priority action: dscp ef” indicates the
action of resetting the priority of the
packets matching the classification rule.
2.1.5 display qos-global traffic-redirect
Syntax
display qos-global traffic-redirect
View
Any view
Parameter
None