Installation manual

Command Manual - QoS/ACL
Quidway S3000-EI Series Ethernet Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-3
Table 2-1 the display Information
Field Description
traffic-priority
Matches: acl std1 rule 0 running
Priority action: dscp ef
Matches: acl std1 rule 1 running
Priority action: dscp ef
Indicates the traffic-priority configuration
of the switch.
“Matches: acl std1 rule 0 running”
indicates the classification rule to the
traffic.
“Priority action: dscp ef” indicates the
action of resetting the priority of the
packets matching the classification rule.
traffic-redirect
Matches: acl std1 rule 0 running
Redirected to: interface
Ethernet0/2
Matches: acl std1 rule 1 running
Redirected to: interface
Ethernet0/2
Indicates the traffic-redirect
configuration of the switch.
“Matches: acl 1 rule 0 running”
indicates the classification rule to the
traffic.
“Redirected to: interface Ethernet0/2”
indicates the redirect port for the
packets matching the classification rule.
traffic-statistic
Matches: acl std1 rule 0 running
0 byte
0 packet
Matches: acl std1 rule 1 running
0 byte
0 packet
Indicates the traffic-statistic
configuration of the switch.
“Matches: acl std1 rule 0 running”
indicates the classification rule to the
traffic.
“ 0 byte 0 packet” indicates
the statistic information for the packets
matching the classification rule.
mirrored-to
Matches: acl std1 rule 0 running
Mirrored to: Ethernet0/1
Matches: acl std1 rule 1 running
Mirrored to: Ethernet0/1
Indicates the mirroring configuration of
the switch.
“Matches: acl std1 rule 0 running”
indicates the classification rule to the
traffic.
“Mirrored to: Ethernet0/1” indicates the
monitor port for the packets matching
the classification rule.
2.1.3 display qos-global mirrored-to
Syntax
display qos-global mirrored-to
View
Any view