Installation manual

Command Manual - QoS/ACL
Quidway S3000-EI Series Ethernet Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-2
Description
Using display qos-global all command, you can view the settings of all the QoS
parameters.
This command is used for displaying the settings of all the QoS parameters, including
priority tag, redirection, traffic statistics and traffic mirror.
Example
# Display the settings of all the QoS parameters.
[Quidway] display qos-global all
traffic-priority
Matches: acl std1 rule 0 running
Priority action: dscp ef
Matches: acl std1 rule 1 running
Priority action: dscp ef
traffic-redirect
Matches: acl std1 rule 0 running
Redirected to: interface Ethernet0/2
Matches: acl std1 rule 1 running
Redirected to: interface Ethernet0/2
traffic-statistic
Matches: acl std1 rule 0 running
0 byte
0 packet
Matches: acl std1 rule 1 running
0 byte
0 packet
mirrored-to
Matches: acl std1 rule 0 running
Mirrored to: Ethernet0/1
Matches: acl std1 rule 1 running
Mirrored to: Ethernet0/1