Installation manual

Command Manual - Multicast
Quidway S3000-EI Series Ethernet Switches Chapter 2 IGMP Snooping Configuration Commands
Huawei Technologies Proprietary
2-1
Chapter 2 IGMP Snooping Configuration
Commands
2.1 IGMP Snooping Configuration Commands
2.1.1 display igmp-snooping configuration
Syntax
display igmp-snooping configuration
View
Any view
Parameter
None
Description
Using display igmp-snooping configuration command, you can view the IGMP
Snooping configuration information.
This command is used to display the IGMP Snooping configuration information of the
switch. The information displayed includes whether IGMP Snooping is enabled, router
port timeout, maximum response timeout of a query and the member port timeout.
For the related command, see igmp-snooping.
Example
# Display the IGMP Snooping configuration information of the switch.
<Quidway> display igmp-snooping configuration
Enable IGMP-Snooping.
The router port timeout is 300 second(s).
The max response timeout is 50 second(s).
The member port timeout is 500 second(s).
The information above tells us that: IGMP Snooping is enabled; the router port timer is
set to be 300 seconds; the max response timer is set to be 50 seconds; the aging timer
of multicast group member is set to be 500 seconds.