Installation manual

Command Manual - VLAN
Quidway S3000-EI Series Ethernet Switches Chapter 4 Voice VLAN Configuration Commands
Huawei Technologies Proprietary
4-6
View
Ethernet port view
Parameter
None
Description
Using the voice vlan mode auto command, you can set the Voice VLAN in auto mode.
Using the undo voice vlan mode auto command, you can set the Voice VLAN in
manual mode.
By default, the Voice VLAN is in auto mode.
If needed, the voice vlan mode auto and undo voice vlan mode auto commands
must be executed before the Voice VLAN features are enabled globally.
For the related command, see display voice vlan status.
Example
# Set the Voice VLAN in manual mode.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet0/13
[Quidway-Ethernet0/13] undo voice vlan mode auto
4.1.8 voice vlan security enable
Syntax
voice vlan security enable
undo voice vlan security enable
View
System view
Parameter
None
Description
Using the voice vlan security enable command you can enable the Voice VLAN
security mode. In this mode, the system can filter out the traffic whose source MAC is
not OUI when the traffic travels through the access port of IP Phone within the Voice
VLAN, while the other VLANs are not influenced. Using the undo voice vlan security
enable command, you can disable the Voice VLAN security mode.