Installation manual

Command Manual - VLAN
Quidway S3000-EI Series Ethernet Switches Chapter 4 Voice VLAN Configuration Commands
Huawei Technologies Proprietary
4-3
For the related command, see display voice vlan status.
Example
# Set the aging time of Voice VLAN to 100 minutes.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] voice vlan aging 100
[Quidway]
4.1.4 voice vlan enable
Syntax
voice vlan enable
undo voice vlan enable
View
Ethernet Port view
Parameter
None
Description
Using the voice vlan enable command, you can enable the Voice VLAN features on
the port. Using the undo voice vlan enable command, you can disable its Voice
VLAN features.
Only the Voice VLAN features in system view and port view are all enabled can the
Voice VLAN function on the port run normally.
For the related command, see display voice vlan status.
Example
# Enable the Voice VLAN features on port Ethernet1/0/2.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface ethernet1/0/2
[Quidway-Ethernet1/0/2] voice vlan enable
[Quidway-Ethernet1/0/2]
4.1.5 voice vlan
Syntax
voice vlan vlan_id enable