Installation manual

Operation Manual - Remote Power-feeding
Quidway S3000-EI Series Ethernet Switches Chapter 1
Remote Power-Feeding Configuration
Huawei Technologies Proprietary
1-9
reachable.
tored on the PC. Using FTP, the
erver and then upgrade the
II
VLAN interface on the switch is 1.1.1.1, and that of the PC is 2.2.2.2. The switch and
PC are
The PoE daughter-card application file new.bin is s
switch can download the new.bin from the remote FTP s
PoE daughter-card .
. Networking diagram
Switch
PC
Network
SwitchSwitch
PC
Network
II
server parameters on the PC: a user named as switch, password
locally through the Console port or remotely using Telnet).
Figure 1-3 Networking for FTP configuration
I. Configuration procedure
1) Configure FTP
hello, read & write authority over the Switch directory on the PC.
2) Configure the switch
# Log into the switch (
<Quidway>
Caution:
If the flash memory of the switch is not enough, you need to first
programs in the flash memory and then upload the new one
delete the existing
s.
to establish FTP connection, then correct
username and password to log into the FTP server.
# Type in the right command in user view
<Quidway> ftp 2.2.2.2
Trying ...
s
Connected.
by Texas Imperial Software) ready for new user
your password, please
Pre s CTRL+K to abort
220 WFTPD 2.0 service (
User(none):switch
331 Give me