Installation manual

Operation Manual - System Management
Quidway S3000-EI Series Ethernet Switches Chapter 8 SSH Terminal Services
Huawei Technologies Proprietary
8-10
Figure 8-5 SSH client interface
1) Key in correct username and password and log into SSH connection.
2) Log out of SSH connection with the logout command.
8.1.4 Displaying and Debugging SSH
Run the display command in any view to view the running of SSH and further to check
configuration result.
Run the debugging command to debug the SSH.
Please perform the following configurations in any view.
Table 8-10 Display SSH information
Operation Command
Display host and server public
keys
display rsa local-key-pair public
Display client RSA public key
display rsa peer-public-key [ brief | name
keyname ]
Display SSH state information
and session
display ssh server { status | session }
Display SSH user information display ssh user-information [ username ]
Enable SSH debugging debugging ssh server { VTY index | all }
Enable RSA debugging
debugging rsa
Disable SSH debugging undo debugging ssh server { VTY index | all }
Disable RSA debugging
undo debugging rsa