Installation manual

Operation Manual - System Management
Quidway S3000-EI Series Ethernet Switches Chapter 8 SSH Terminal Services
Huawei Technologies Proprietary
8-7
z Choosing SSH version. The switch currently supports SSH Server 1.5, so you
have to choose 1.5 or earlier version.
z Specifying RSA private key file. If you specify RSA authentication for the SSH user,
you must specify RSA private key file. The RSA key, which includes the public key
and private key, are generated by the client software. The former is configured in
the server (switch) and the latter is in the client.
The following description takes the PuTTY as an example.
I. Specifying server IP address
Start PuTTY program and the client configuration interface pops up.
Figure 8-2 SSH client configuration interface (1)
In the Host Name (or IP address) text box key in the IP address of the switch, for
example, 10.110.28.10. You can also input the IP address of an interface in UP state,
but its route to SSH client PC must be reachable.
II. Selecting SSH protocol
Select SSH for the Protocol item.
III. Choosing SSH version
Click the left menu [Category/Connection/SSH] to enter the interface shown in
following figure: