Installation manual

Operation Manual - System Management
Quidway S3000-EI Series Ethernet Switches Chapter 3 Device management
Huawei Technologies Proprietary
3-2
Table 3-2 Designate the APP adopted when booting the Ethernet switch next time
Operation Command
Designate the APP adopted when
booting the Ethernet switch next time
boot boot-loader file-url
3.2.3 Upgrade BootROM
You can use this command to upgrade the BootROM with the BootROM program in the
Flash Memory. This configuration task facilitates the remote upgrade. You can upload
the BootROM program file from a remote end to the switch via FTP and then use this
command to upgrade the BootROM.
Perform the following configuration in user view.
Table 3-3 Upgrade BootROM
Operation Command
Upgrade BootROM
boot bootrom file-url
3.3 Display and Debug Device Management Configuration
After the above configuration, execute display command in any view to display the
running of the Device management configuration, and to verify the effect of the
configuration.
Table 3-4 Display and debug Device management configuration
Operation Command
Display the APP to be applied when
rebooting the switch.
display boot-loader
Display the module types and running
states of each slot
display device
Display the busy status of CPU
display cpu
Display the Used status of switch
memory
display memory [ slot slot-number ]