Installation manual

Operation Manual - Network Protocol
Quidway S3000-EI Series Ethernet Switches Chapter 3
DHCP Client Configuration
Huawei Technologies Proprietary
3-3
3.2.1 Con ing DHCP
Table 3-1 Configuring a VLAN interface to obtain IP address using DHCP
figuring a VLAN Interface to Obtain IP Address Us
Perform the following configuration in VLAN interface view.
Operation Command
Configure VLAN interface to obtain IP
ip address dhcp-alloc
address using DHCP
Remove the config
undo ip address dhc oc
uration
p-all
B e does not obt
3.3 Displaying and Debugging DHCP Client Configuration
After the above configuration, execute display command in any view to display the
ion.
Execute debugging command in user view to debug DHCP Client configuration.
y default, the VLAN interfac ain IP address using DHCP.
running of the DHCP Client configuration, and to verify the effect of the configurat
Table 3-2 Displaying and debugging DHCP Client configuration
Operation Command
Display address allocation
ose ]
information of DHCP client
display dhcp client [ verb
Enable/dis P client
debugging
[ undo ] debuggi ent { all | error |
event | packet }
able DHC ng dhcp cli