Installation manual

Operation Manual - Security
Quidway S3000-EI Series Ethernet Switches
Chapter 2 AAA and RADIUS Protocol
Configuration
Huawei Technologies Proprietary
2-7
relevant properties Table 2-5 Creating/Deleting a local user and
Operation Command
Add local users
local-user
user-name
Delete all the local users
undo loca
l-user all
Delete a local user by undo local-user { user-name | all [ service-type
{ lan-acces
specifying its type s | ftp | telnet | ssh } ] }
B s no local user in the system.
2.2.6 Setting Attributes of Local User
The attributes of a local user include its password display mode, state, service type and
I.
y default, there i
some other settings.
Setting the password display mode
Perform the following configurations in system view.
Table 2-6 Setting the method that a local user uses to display password
Operation Command
Set the mode that a local user
uses to display password
local-user password-display-mode
{ cipher-force | auto }
Cancel the mode that the local
u r uses to display password
undo local-user pa
se
ssword-display-mode
Wh re, auto means that the password dise play mode will be the one specified by the
ord command in the following
table for reference), and cipher-force means that the password display mode of all the
II. Setting the attributes of local users
P
T utes concerned with a specified user
user at the time of configuring password (see the passw
accessing users must be in cipher text.
erform the following configurations in local user view.
able 2-7 Setting/Removing the attrib
Operation Command
Set a password for a
specified user
password { simple | cipher } password
Remove the password set
for the specified user
undo password
Set the state of the specified
user
state { active | block }