Installation manual

Operation Manual - Security
Quidway S3000-EI Series Ethernet Switches Chapter 1
802.1x Configuration
Huawei Technologies Proprietary
1-10
y default, 802.1x client version authentication is disabled on all ports.
ot specified, it means that to enable
the 802.1x client version authentication feature on all interfaces; if the interface-list
re on the specified interfaces. In
Ethernet port view, the parameter cannot be specified, and you can use
II
rst time, if the switch receives no
response from the client response within a certain period of time (set by the version
again. When the switch
nticates the
ations.
If configured, th functions on all ports that enabled version authentication
fu
Perform the f ng in system view.
T guring the maximum retry times for the switch to send version request
ame to the client
B
In system view, if the interface-list parameter is n
parameter is specified, it means that to enable the featu
interface-list
command only to enable the feature on the current interface.
. Configuring the maximum retry times for the switch to send version request
frame to the client
After sending client version request frame for the fi
authentication timeout timer), it resends version request
receives no response for the configured maximum times, it no longer authe
version of the client, and perform the following authentic
is command
nction.
ollowi
able 1-12 Confi
fr
Operation Command
Configure the maximum retry times for the
switch to send version request frame to the
client
max-retry-version-value
dot1x retry-version-max
Return to the defaults
undo dot1x retry-version-max
By default, the switch tries 3 times at the most to send version request frame to the
II eout timer of version authentication
access user.
I. Configuring the tim
Perform the following in system view.
Table 1-13 Configuring the timeout timer of version authentication
Operation Command
Configure parameters of the timer
dot1x timer ver-period ve
r-period-value
Return to the defaults
undo dot1x timer ver-period
By default, ver-period-value is 1 second.