Installation manual

Operation Manual - Integrated Management
Quidway S3000-EI Series Ethernet Switches Chapter 2
HGMP V2 Configuration
Huawei Technologies Proprietary
2-11
able 2-11 Start topology information collection T
Operation Command
Start topology information collection
ntdp explore
2.3.8 Display and Debug NTDP
e configuration.
After the above configuration, execute display command in any view to display the
running of the NTDP configuration, and to verify the effect of th
Table 2-12 Display and Debug NTDP
Operation Command
Display global NTDP information.
display ntdp
Display the device information collected
by NTDP.
display ntdp device-list [ verbose ]
Whe t the verbose parameter, it will
displ d cuted with the verbose
arameter, it will display the detailed information about the devices collected by NTDP.
2.4.1 Clus
This section describes the relevant configurations of cluster management, including
ow to configure public network IP address for
administrator device, ho e a cluster membe re the
handshaking int
There must r dev for every cluster. A cluster
c to
desi administrator device first. It is the entrance and exit to access the cluster
embers, that is, a user on the external network can access, configure, manage, and
establishes a cluster. The administrator device learns the network topology through
NDP/NTDP information collection to manage and monitor the device.
Before performing other configuration tasks, the cluster function is supposed to be
enabled first.
n the display ntdp device-list is execute
ay the list of the devices collecte
d withou
by NTDP. When exe
p
2.4 Configure Cluster
ter Overview
how to enable and set up a cluster, h
w to add/delet
erval etc.
r and how to configu
be a unique administrato ice configured
ontains only one administrator device. Wh
gnate an
en creating a cluster, you are supposed
m
monitor the cluster members through it. an administrator device recognizes and
controls all the local members, no matter where they are located on the network or how
they are connected. In addition, it is responsible for collecting the topology information
about all the members and candidates to provide useful information for a user when he