Installation manual

Operation Manual - Integrated Management
Quidway S3000-EI Series Ethernet Switches Chapter 2
HGMP V2 Configuration
Huawei Technologies Proprietary
2-10
Table 2-9 Set delay for collected device to forward topology collection request.
Operation Command
Set delay for collected device to forward
topology collection request.
ntdp timer hop-delay time
Restore the default delay for collected device
to forward topology collection request.
undo ntdp timer hop-delay
Set delay for collected port to forward
topology collection request.
ntdp timer port-delay time
Restore the default delay for collected port to
undo ntdp timer port-delay
forward topology collection request.
By default, the device to be collected forwards the topology request after delaying for
200ms, the port to be collected forwards the topology collection request after a delay of
2.3.6 Set Topology
In pology changes in time, it is necessary to periodically
c
Perform the f .
T tion interval
20ms.
Collection Interval
order to learn the global to
ollect the topology information throughout the whole scope specified.
ollowing configuration in system view
able 2-10 Set topology collec
Operation Command
Set topology collection interval
ntdp timer interval-in-mins
Restore the default topology collection interval.
undo ntdp timer
By defa
ult, the value of topology collection is 0, that is, the regular topology collection
will not be performed.
es, NTDP also
anually.
Whenever you want to manually collect the network topology information for the
ring, simply use the following command to
start the process.
P n in user view.
2.3.7 Start manually Topology Information Collection
After the topology collection interval is specified, NTDP will automatically and
periodically collects topology information throughout the network. Besid
provides commands for network topology collection m
purpose of device management and monito
erform the following configuratio