Installation manual

Operation Manual - QoS/ACL
Quidway S3000-EI Series Ethernet Switches Chapter 3
Logon User ACL Control Configuration
Huawei Technologies Proprietary
3-5
 Note:
Only the numbered basic ACL can be called for network management user control.
3.3.3 Co
requirements
user from 10.110.100.52 and 10.110.100.46 access switch.
nfiguration Example
I. Networking
Only permit SNMP
II. Networking diagram
Internet
Switch
Figure 3-2 Controlling SNMP users with ACL
II
-order config
asic-2020] rule 1 permit source 10.110.100.52 0
rmit source 10.110.100.46 0
3.4 Con
ent through WEB. The
switch through HTTP. Controlling such users with ACL can help
m from accessing the local switch. After
the switch allows only one WEB user to
Take the following steps to control the HTTP users with ACL.
1) Defining ACL
I. Configuration procedure
# Define the basic ACLs.
[Quidway] acl number 2020 match
[Quidway-acl-b
[Quidway-acl-basic-2020] rule 2 pe
[Quidway-acl-basic-2020] quit
# Call the basic ACLs.
[Quidway] snmp-agent community read huawei acl 2020
[Quidway] snmp-agent group v2c huaweigroup acl 2020
[Quidway] snmp-agent usm-user v2c huaweiuser huaweigroup acl 2020
figuring ACL Control over the HTTP Users
Quidway Ethernet switch series support the remote managem
users can access the
r
filte the illegal users and prevent the
configuring ACL control over these users,
access the Ethernet switch at one time.