Installation manual

Operation Manual - QoS/ACL
Quidway S3000-EI Series Ethernet Switches Chapter 1
ACL Configuration
Huawei Technologies Proprietary
1-13
e ACL.
] packet-filter link-group traffic-of-link
1.3.4 User-defined ACL Configuration Example
I. Net
Using user-defined ACL, filter the TCP packet during time range 8:00 ~ 18:00 every
.
II. Net
3) Activat
# Activate the ACL traffic-of-link .
[Quidway
working requirements
day
working diagram
Switch
#1
connect to Router
II
Figure 1-5 Access control configuration example
I. Configuration procedure
 Note:
In the following configurations, only the commands related to ACL configurations are
listed.
1) Define the ti
me range
:00 to 18:00.
[Quidway] time-range huawei 8:00 to 18:00 daily
s traffic-of-tcp.
# Activate the ACL traffic-of-tcp .
r-group traffic-of-tcp
# Define time range from 8
2) Define the ACL for TCP packet.
# Enter the named user-defined ACL, named a
[Quidway] acl name traffic-of-tcp user
# Define the rules for TCP packet.
[Quidway-acl-user-traffic-of-tcp] rule 1 deny 06 ff 35 time-range huawei
3) Activate ACL.
[Quidway] packet-filter use