Installation manual

Operation Manual - QoS/ACL
Quidway S3000-EI Series Ethernet Switches Chapter 1
ACL Configuration
Huawei Technologies Proprietary
1-12
source 10.1.1.1 0 time-range
huawei
# Activate the ACL traffic-of-host .
Quidway] packet-filter ip-group traffic-of-host
1.3.3 Link ACL C
I.
n s is 00e0-fc01-0101 and
ange 8:00 ~ 18:00 every day.
II. Networking diagram
[Quidway-acl-basic-traffic-of-host] rule 1 deny
3) Activate ACL.
[
onfiguration Example
Networking requirements
Usi g Link ACL, filter the packet which source MAC addres
destination MAC address is 00e0-fc01-0303 during time r
Switch
#1
connect to Router
Figure 1-4 Access control configuration example
III. Configuration procedure
 Note:
In the following configurations, only the commands related to ACL configurations are
listed.
ce MAC address is 00e0-fc01-0101 and
# Enter the named link ACL, named as traffic-of-link.
# Define the rules for packet which source MAC address is 00e0-fc01-0101 and
estination MAC address is 00e0-fc01-0303.
[Quidway-acl-link-traffic-of-link] rule 1 deny ip ingress 00e0-fc01-0101
0-0-0 egress 00e0-fc01-0303 0-0-0 time-range huawei
1) Define the time range
# Define time range from 8:00 to 18:00.
[Quidway] time-range huawei 8:00 to 18:00 daily
2) Define the ACL for packet which sour
destination MAC address is 00e0-fc01-0303.
[Quidway] acl name traffic-of-link link
d