Installation manual

Operation Manual - QoS/ACL
Quidway S3000-EI Series Ethernet Switches Chapter 1
ACL Configuration
Huawei Technologies Proprietary
1-9
ating ACL Table 1-9 Activ
Operation Command
Activate an
ACL
packet-filter { user-group { acl-number | acl-name } [ rule rule ] |
{ ip-group { acl-number | acl-name } [ rule rule ] | link-group
{ acl-number | acl-name } [ rule rule ] }* }
Deactivate an
undo packet-filter { user-group { acl-number |
rule ] | { ip-group { acl-number | acl-name } [ rule
ACL
acl-name } [ rule
rule ] | link-group
e ] }* }
{ acl-number | acl-name } [ rule rul
Note:
This command su e
ti
c ation item lict (one is permit and the
other is deny), the
pports the process to activate the Layer-2 and IP ACLs at the sam
lude basic and advanced ACLs), however the actions of the
s should be consistent. If the actions conf
me(IP ACLs inc
ombin
y cannot be activated.
1.2.4 Displaying and Debugging ACL
After the above configuration, execute display command in all views to display the
running of the ACL configuration, and to verify the effect of the configuration. Execute
reset command in user view to clear the statistics of the ACL module.
Table 1-10 Displaying and debugging ACL
Operation Command
Display the status of the time range display time-range { all | name }
Display the detail information abou
ACL
t the display acl config { all | acl-number |
acl-name }
Display the information about the ACL
running state
display acl running-packet-filter all
Clear ACL counters
reset acl counter { all |
acl-name }
acl-number |
The matched inf isplay acl config command s les treated by
th ation an be
d
For syntax description, refer to the Comman
ormation of d pecifies the ru
e switch’s CPU. The matched inform of the transmitted data by switch c
isplayed by display qos-global traffic-statistic command.
d Manual.