Installation manual

Operation Manual - QoS/ACL
Quidway S3000-EI Series Ethernet Switches Chapter 1
ACL Configuration
Huawei Technologies Proprietary
1-4
Operation Command
Dele lute
time range
undo time-range tim art-time to end-time
te the abso
e-name [ st
days-of-the-week | from start-time start-date ]* [ to end-time
end-date ]
When the start-time and .
T
When end-time end-dat figured, it will be all the time from now to the date
hich can be displayed by the system. The end time shall be later than the start time.
1.2.2 Defi
Defining ACL by following the steps below:
corresponding ACL view
2) add a rule to the ACL
No
end-time are not configured, it will be all the time for one day
ter than the start time.
e is not con
he end time shall be la
w
ning ACL
Huawei Switches support several kinds of ACLs. Here we will introduce how to define
these ACLs.
1) enter the
You can add multiple rules to one ACL.
 te:
z a specific time rang is not defined, If the ACL will always function after activated.
D fining the ACL, you can use the rule command for several
L.
If ACL is used for filter or classify the data transmitted by the hardware of switch, the
match order defined in the acl command will not be effective. If ACL is used for filter
ify the data treated by the software of switch, the match order of ACL’s
z
z uring the process of de
times to define multiple rules for an AC
z
or class
sub-rules will be effective. Besides, once the user specifies the match-order of an
ACL rule, he cannot modify it later.
The default matching-order of ACL is config, i.e. following the order as that
configured by the user.
I. De
Th
an
You can use the following command to define basic ACL.
erform the following configuration in corresponding view.
fining the basic ACL
e rules of the basic ACL are defined on the basis of the Layer-3 source IP address to
alyze the data packets.
P